%
- Air condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 2 litres and maximum 4 litres. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 10/15 min. - Hourly production: 20 litres. NB: mainly for cold work, delivered on wheels.
%
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Removable bowl and tilting head.2 Speeds.Standard with timer.Diameter of the bowl 350 mm (22 liters) = 18 kg dough. Structure made of painted steel.Rotating cockpit in stainless steel AISI 304.Spiral in stainless steel fusion high strength divisor in stainless steel AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Low voltage control 24 V...
%
Removable bowl and tilting head.2 Speeds.Standard with timer.Diameter of the bowl 350 mm (22 liters) = 18 kg dough. Structure made of painted steel.Rotating cockpit in stainless steel AISI 304.Spiral in stainless steel fusion high strength divisor in stainless steel AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Low voltage control 24 V...
%
Removable bowl and tilting head.2 Speeds.Standard with timer.Diameter of the bowl 350 mm (22 liters) = +/-18 kg dough. Structure made of painted steel.Rotating cockpit in stainless steel AISI 304.Spiral in stainless steel fusion high strength divisor in stainless steel AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Control panel with IP21...
%
Removable bowl and tilting head.2 Speeds.Standard with timer.Diameter of the bowl 350 mm (22 liters) = +/-18 kg dough. Structure made of painted steel.Rotating cockpit in stainless steel AISI 304.Spiral in stainless steel fusion high strength divisor in stainless steel AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Control panel with IP21...
%
%
Removable bowl and tilting head.2 Speeds.Standard with timer.Diameter of the bowl 350 mm (22 liters) = 18 kg dough. Structure made of painted steel.Rotating cockpit in stainless steel AISI 304.Spiral in stainless steel fusion high strength divisor in stainless steel AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Low voltage control 24 V...
%
Removable bowl and tilting head.2 Speeds.Standard with timer.Diameter of the bowl 350 mm (22 liters) = 18 kg dough. Structure made of painted steel.Rotating cockpit in stainless steel AISI 304.Spiral in stainless steel fusion high strength divisor in stainless steel AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Low voltage control 24 V...
%
1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Refrigeration unit on the left side.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Conception MonocoqueManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
- Rear edge raised.- Made of AISI 441 stainless steel.- Soundproofed and reinforced work surface.- Reinforced lower shelf.- Welded structure.- Adjustable stainless steel cylinders.
%
Made of AISI 441 stainless steel.Soundproofed and reinforced work surface.Reinforced lower shelf.Welded structure.Adjustable stainless steel cylinders.
%
Uitvoering in RVS 18/10 AISI 304Opstaande boord achteraan aan werkblad, andere zijdendoorgeplooid.Werkblad versterkt en voorzien van geluidsdempende isolatieVersterkte basistablet 40 mm dik op 200 mm boven vloerVolledig gelast frame, buis 40x40RVS regelvoeten
%
Opstaande boord achteraanUitvoering in RVS 18/10 AISI 304Werkblad versterkt en cvoorzien van geluiddempende isolatieVersterkt basistabletVolledig gelast frameRVS regelvoeten
%
Uitvoering in RVS 18/10 AISI 304.Dikte 15/10mm.Opstaande rand achteraan aan werkblad, andere zijden metdubbele omslag naar beneden van 40mm.Werkblad verstevigd en voorzien van geluidsdempende isolatieBodemblad vestevigd op 200 mm boven vloer.Volledig gelast frame, buis 40x40x1.2mmRVS regelvoeten.
%
Opstaande boord achteraanUitvoering in RVS 18/10 AISI 304Werkblad versterkt en voorzien van geluiddempende isolatieVersterkt basistabletVolledig gelast frameRVS regelvoeten
%
Uitvoering in RVS 18/10 AISI 304.Dikte 15/10mm.Opstaande rand achteraan aan werkblad, andere zijden metdubbele omslag naar beneden van 40mm.Werkblad verstevigd en voorzien van geluidsdempende isolatieBodemblad vestevigd op 200 mm boven vloer.Volledig gelast frame, buis 40x40x1.2mmRVS regelvoeten.
%
- Rear edge raised.- Made of AISI 441 stainless steel.- Soundproofed and reinforced work surface.- Reinforced lower shelf.- Welded structure.- Adjustable stainless steel cylinders.
%
Uitvoering in RVS 18/10 AISI 304Opstaande boord achteraan aan werkblad, andere zijdendoorgeplooid.Werkblad versterkt en voorzien van geluidsdempende isolatieVersterkte basistablet 40 mm dik op 200 mm boven vloerVolledig gelast frame, buis 40x40RVS regelvoeten
%
- Rear edge raised.- Made of AISI 441 stainless steel.- Soundproofed and reinforced work surface.- Reinforced lower shelf.- Welded structure.- Adjustable stainless steel cylinders.
%
Opstaande boord achteraanUitvoering in RVS 18/10 AISI 304Werkblad versterkt en voorzien van geluidsdempende isolatieVersterkt basistabletVolledig gelast frameRVS regelvoeten
%
- Rear edge raised.- Made of AISI 441 stainless steel.- Soundproofed and reinforced work surface.- Reinforced lower shelf.- Welded structure.- Adjustable stainless steel cylinders.