%
Solid beech wood frame with plywood base and sides. Wenge finish.Stainless steel bowl GN , 150 mm deep.Heating with submerged electric resistance protected by grids. Digital thermometer/thermostat.Knife holder, Swivel castors.
%
Solid beech wood frame with plywood base and sides. Wenge finish.Stainless steel bowl GN, 150 mm deep.Heating with submerged electric resistance protected by grids. Digital thermometer/thermostat.Knife holder, Swivel castors.
%
Version for espresso coffee and American coffee (small lifting cup rest grill).Boiler capacity 5 litres.1 steam tap, tube and head vaporizing all stainless steel.1 hot water tap.Supplied with 2 pouring spouts, 1x (2 cups) and 1x (1 cup) and "blind" filter for daily maintenance of the groups.Electronic machines with "volumetric" dosing unit, control keypad with backlit keys (double contact).Unit made of brass (chrome finish), heat guaranteed, with pre-infusion, solenoid valve for each...
%
%
- Gas model. - In option : Trolley 15 or 18x 450x650 mm (or) 15 or 18x 500x700 mm, burner (gas or fuel oil) as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Steel heat exchanger "high productivity", very low energy consumption.- Turning chariot, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal...
%
- Gas model. - In option : Trolley 15 or 18x 450x650 mm (or) 15 or 18x 500x700 mm, burner (gas or fuel oil) as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Steel heat exchanger "high productivity", very low energy consumption.- Turning chariot, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal...
%
%
%
Unit width 400 mm, small footprint.Cooling capacity 953 (W/f) for chamber volume 6,1 m³ / 6100 Lit (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Supplied with a cable for the connection of the door heater. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The...
%
An intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED...
%
LED lighting of the display (under the upper glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED lighting of the exposure.Intermediate...
%
Two intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Structure support AISI 304 for gastronome tray, maximum depth 150mm.Refrigerated display vat available only on ventilated showcase.Bain-marie and dry heat display vat available only on neutral display case.NB: It is recommended not to put an intermediate shelf.
%
Three-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5800 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Capacity 4x GN 1/1.Recessed dimensions 1415x585. Flat surface, with a slightly raised peripheral edge, allowing better food exposure.Cooling by a coil evaporator (copper), placed just below the plate.Drain 1/2"Control panel with electronic regulation from 0° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On request)Integrated refrigeration unit, refrigerant R290aAutomatic...
%
2 distinct flat surfaces, the upper surface (service side) is placed 70 mm above the first (better visibility of the food)Capacity 4x GN 1/1.Recessed dimensions 1415x585. Flat surfaces, with a slightly raised peripheral edge, allowing for better food exposure.Cooling by means of a coil evaporator (made of copper), placed just below the plate .1/2" drainControl panel (service side) with electronic 0° +8° control, digital displayCFC-free polyurethane foam insulationPredisposed for the placement...
%
Hourly production : 260 to 300 kg/h, 60 to 80 kg/h for leaf vegetables.Realisation in stainless steel AISI 304.Basin in stainless steel AISI 304, double filter, equiped with an overflow.4 programmes available : washing and dry-spinning, pre-washing, continuous washing, dry-spinning.Manual control of the water flow, integrated discharge pump.Cover with safety micro-switch.Disinfectant dispenser (standard).45-liter basket in stainless steel, mesh of 16 mm.Removable pre-flush for cleaning of the...
%
Thermoformed ABS cheeks, front and back in laminated sheet metal.Tempered glass windows, front glass at 90° angle.Curved glass support.Profiles in quartz of the "white technologic" type.Exhibition made of AISI 304 stainless steel, depth 700 mm (EURONORM and GASTRONORM).Plexiglas deflector, allowing uniform temperature distribution.Working shelf in "white technologic" quartz.LED lighting for the exhibition (positioned under the working top).Intermediate glass shelf.Ventilated evaporator,...
%
Oven "CROSSWISE" loading plates GN 2/1 ( or GN 1/1).1 detachable pitch of 60mm "anti tilting".Adjustable feet in stainless steel. Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy...
%
Refrigerant gas R290 Self-service sale.External realization in plasticized sheet metal, ABS sides.Stainless steel perforated tank and grid.LED top lighting.3 adjustable display shelves (340 mm) (stainless steel) height-adjustable. Equipped with "price holder" mouldings.Electronic regulator (digital display).Ventilated evaporator (air force). Double self-evaporation of condensate, hot gas + electric resistance.Built-in compressor unit,climate class 3 (+25°C & RH 60%).On request: night...
%
Sides in ABS thermoformed, front and back in plastic sheet.Tempered glass windows, front window 90 ° right, openable and foldable with a safety stop point (easy maintenance).Exhibition in stainless steel AISI 304, depth 750 mm.Worktop made of AISI 304 stainless steel.LED-type exposure lighting (positioned under the upper glass).Plexiglass sliding doors on the service side.Ventilated evaporator "air force" treated against food acids "coating" (device adjustable speed of the fans).Built-in...
%
Sides in ABS thermoformed, front and back in plastic sheet.Tempered glass windows, front window 90 ° right, openable and foldable with a safety stop point (easy maintenance).Exhibition in stainless steel AISI 304, depth 750 mm.Worktop made of AISI 304 stainless steel.LED-type exposure lighting (positioned under the upper glass).Plexiglass sliding doors on the service side.Ventilated evaporator "air force" treated against food acids "coating" (device adjustable speed of the fans).Built-in...
%
Dimensions of the basin 306x510xh156 mm. Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders.Deep-drawn tank in AISI 316 stainless steel with rounded corners and double perforated bottom for draining food. GN capacity 1/1 h150 mm.Electric heating, vault with ceramic resistance placed above the appliance. ON/OFF switch with indicator light.Appliances built in compliance with current standards (CE).