%
Degreaser product for professional use, to remove greasy dirt in the kitchen, but especially to polish any polished or satin-finished steel surface like tables, hoods, interiors of refrigeration cells, slicers, trolleys, etc. .; Degreases perfectly and makes the surface shine again.MODALITIES OF USE: Ready to use to spray directly on surfaces to be cleaned and polished. Leave for a few seconds, then wipe with disposable paper.
%
- Frame version with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated motor, drive by hermetic gear motor, under oil bath, double protection of liquids. - Ideal for hard mixes or salads (minimum load 40%).- Tank with double liquid protection, foldable (with lever), automatic locking and safety locking device.- Cover equipped with a safety microswitch.- 2 mixing arms (side by side), removable (without tools), easy maintenance.- Geared motor housed in the side...
Capacity bread / hour: 300.Slice thickness: from 9 to 14mm and 16mm.Roll size: 440X300X170mm.Power: 550W.Power supply: TRI.380V (MONO optional).
Very easy to use and control citrus juicer. You just have to place half of the fruit and lower the lever to start the mechanism.
%
Table top model.Made of AISI 304 stainless steel.Powerful motor. The rotor works in oil-bath and it's equipped with a double sealing system.Safety microswitch on the cover.Removable AISI 304 stainless steel mixing arm (no tools required).Front outlet opening for shaft removal and product unload.IP 54 on/off switch with NVR (24 V) and reverse for a better mix.Machine produced in accordance with the actual CE standards.
Frame: white color (RAL 9003), other colors on request with added valueBread loading: from the rearCutting width: 450mmSlice thickness: 11 mm as standard (other possible thicknesses: 9 or 13 mm to be specified when ordering, with a lead time of 8 weeks)Maximum height of the loaves: 16 cm - Ball: ø 33 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start by operating the lever"Punch" emergency stop device on the frontPower supply: three-phase 380 volts +...
Stainless steel / plastic version, 8cm opening, with separate pulp drain in the large plastic container, equipped with rubber feet that prevent leakage and vibrations, easy to clean, all parts that come into contact with the food are there 'stainless steel, safety and lock lever for opening and closing the centrifuge. Opening 8 cm.
%
- Version on base with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated, hermetically sealed gearmotor drive, under oil bath, double liquid protection.- Lid fitted with safety micro-switch.- Mixing arms can be removed (no tools required), easy maintenance.- Bowl opening on the side, for discharge of mixture and mixing arm.- 24 V controls (IP 54), with rotation inversion (better homogenization).
Round filter machine with separate hot water tap for places with water connection. Brews large quantities of coffee in separate containers. Equipped with digital display, total and day counters, descaling system, coffee-ready signal, integrated infinite and optimal safety provisions. Including container type hvg, filter unit(s) and drip tray.Model with 1 brewing system with separate hot water tap and 2 containers of 20 liters.Strong pointsQuickly large quantities of fresh filter coffeeRobust...
Bread capacity / hour: 300.Slice thickness: from 9 to 14mm; 16mm; 12 + 14mm and 14 + 16.Size of the bread: 600X300X170.Power: 550W.Power supply: TRI.380V (MONO optional)
%
- Chassis-mounted version with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated motor, hermetically sealed gear motor drive, under oil bath, double liquid protection. - Ideal for hard mixes or salads (minimum load 40%).- Bowl with double liquid protection, hinged (with lever), automatic locking and safety locking device.- Lid fitted with safety microswitch.- 2 mixing arms (side by side), removable (no tools required), easy maintenance.- Geared motor housed in...
Round filter machine for places with water connection. Brews large quantities of coffee in separate containers. Equipped with digital display, total and day counters, descaling system, coffee-ready signal, integrated infinite and optimal safety provisions. Including container type hvg, filter unit(s) and drip tray.Model with 1 brewing system and 1 container of 20 liters (on the left or on the right of the column). This allows you to easily compile, for example, double or triple...
Bread capacity / hour: 300.Slice thickness: 9-> 14mm / 16mm.Max bread dimension: 440X300X170mm.Motor power: 550W.Voltage: 230 / 400V 3Ph 50Hz.
Round filter machine for places with water connection. Brews large quantities of coffee in separate containers. Equipped with digital display, total and day counters, descaling system, coffee-ready signal, integrated infinite and optimal safety provisions. Including container type hvg, filter unit(s) and drip tray.Model with 1 brewing system and 2 containers of 40 litres.Strong pointsQuickly large quantities of fresh filter coffeeRobust and high-quality appearance thanks to stainless steel...
CAPACITY: loaves / hour 250 SLICE THICKNESS: 9 -> 14 mm / 16 mm SUN. MAX. BREAD: 440 x 300 x 165 mmMOTOR POWER: 550WVOLTAGE: 400V 3Ph 50Hz / * 230V 1Ph 50Hz (opt.)
%
Frame: WHITE RAL N°9003, other colors on request with capital gainBread loading: from aboveCutting width: 450mmSlice thickness: 11 mm as standard (other thicknesses possible: 9 or 13 mm to be specified when ordering, with 8 week lead time)Maximum height of the loaves: 18 cm - Ball: ø 30 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start-up by actuation of the lever"Punch" emergency stop device on the sidePower supply: three-phase 380 volts + neutral + earth...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Stainless steel AISI 304 lever on top.- All parts in contact with the citrus fruit can be dismatled without tools, easy maintenance.- Delivered with 1 polycarbonate mug.- Motor 1300 rpm with thermal security.- Finishing: orange.Note: continuous time of use span 30 min.
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Stainless steel AISI 304 lever on top.All parts in contact with the citrus fruit can be dismatled without tools, easy maintenance.Delivered with 1 polycarbonate mug.Motor 1300 rpm with thermal security.Finishing: chrome.
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Version for espresso coffee and American coffee (small lifting cup rest grill).Boiler capacity 11 litres.2 steam valves, tube and head steaming all stainless steel1 hot water outlet, electronic control, programmable.Supplied with 3 pouring spouts, 2x (2 cups) and 1x (1 cup) and "blind" filter for daily maintenance of the groups.Electronic machines with "volumetric" dosing unit, control keypad with backlit keys (double contact).Unit made of brass (chrome finish), heat guaranteed, with...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...