%
Tubular stainless steel structure, cross-section 2.5x2.5 cm, weldednext to the stainless steel finishing panel.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm.Lower levels with extractable stainless steel shelves, depth 2 cm.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 100 kg.
%
Tubular stainless steel structure, cross-section 2.5x2.5 cm.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm (containers not included).Lower levels with extractable stainless steel shelves.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 80 kg.
%
Tubular stainless steel structure, cross-section 2.5x2.5 cm.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm (containers not included).Lower levels with extractable stainless steel shelves.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 80 kg..
%
Stainless steel tube structure AISI 304 18/10 20x20 mm.Sloping base and stainless steel AISI 304 covering.Capacity 200 plates.4 swivel castors with stubborn Ø 125, 2 with brake.Can be dismantled.
%
Capacity 6Kg, accuracy 1g. Electronic table scale.Weighing pan 300x210mm in stainless steel 304.Solid ABS case for industrial use.IP-67 protection rating.Double backlit LED display with 20mm (front and back) digits.LED control indicator signals lower, upper and acceptable limits.Weighing control with audible alarm.Stabilization time: 1 sec.Programmable automatic power off.DC adapter (12 volts) and internal rechargeable battery, 55 hours of autonomy.Battery level indicator.Protection of the...
%
Model 1 speed.Tank diameter 260 mm (10 liters) = 8 kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security micro switch.Transmission by geared motor by oil bath, reliable, high-performance and silent!!Hanging motor, better ventilation, ease of maintenance.Low voltage control 24 V (IP65), NVR (No-Voltage Release) avoiding any unintentional...
%
Model 1 speed.Tank diameter 260 mm (10 liters) = +/- 8kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security micro switch.Transmission by geared motor by oil bath, reliable, high-performance and silent!!Hanging motor, better ventilation, ease of maintenance.Control panel with IP21 protection.Standard delivered with wheels including 2...
%
Model 1 speed.Tank diameter 260 mm (10 liters) = 8 kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security micro switch.Transmission by geared motor by oil bath, reliable, high-performance and silent!!Hanging motor, better ventilation, ease of maintenance.Low voltage control 24 V (IP65), NVR (No-Voltage Release) avoiding any unintentional...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped...
%
Tank diameter 600, depth 400 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 400 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 400 mm, depth 420 mm.Drain tap 6/4". Made of stainless steel AISI 304, adjustable feet in stainless steel.Pressed and sealed top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Deep-drawn tank made of AISI 304 stainless steel, bottom in AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with removable strainer for protection of the drain valve, corners with...
%
Diameter of the tank 600 mm, depth 420 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
Diameter of the tank 600 mm, deep 540 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
- Diameter of the basin 420, depth 485 mm.- Outlet tap of 1,1/2".- Made of AISI 304 stainless steel, "deep drawn" top (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5". - Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank. - Deep-drawn" cover, made of AISI 316 stainless steel with double...
%
Diameter of the basin 420, depth 485 mm.Outlet tap of 1,1/2". Made of AISI 304 stainless steel, "deep-drawn" top (15/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, adjustable stainless steel feet.Tank "pressed" made of stainless steel AISI 304 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double-walled tank, water filling through a tap, a second one serving as an overflow to check...
%
Tank diameter 400 mm, depth 420 mm.6/4" drain valve.Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn and waterproof top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Deep-drawn" tank made of AISI 304 stainless steel, bottom made of AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve, rounded inner...
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....