%
%
2 pumps, one rinse and one wash.The product never comes into contact with the membrane, as it happens on the contrary with the "hydraulic" system, much more reliable, less after-sales service...No malfunction because of the pressure of the water network, as it frequently happens on the contrary with the "hydraulic" pumpPermits to determine a very precise dosing, no waste, so bigger savings.
%
- Flue spigot diam 250 mm.NB : recommended for machines without steam condenser DVM-C.
%
- For machines powered with cold water.
%
Filter in full tank.Double skin construction.For models : D160E/7 - DATIC37E/7.Dimensions : 820x990xh1565 mm.
%
%
With inspection window.Double skin construciton.Dimensions : 820x879xh1765 mm.
%
%
Anti-pollution device, UK standard (WRC).The "break tank" is an AB type "anti-pollution" device (UK standards)It prevents the tank water (with detergents) to flow back into the distribution systemIts pump guarantees a constant pressure during the whole rinsing, the drying and hygiene are guaranteed by a T° of 85°C... until the last drop of water!
%
Ventilated motor with thermal protection. Ventilated engine.Frame, upper and retrieval basin in stainless steel AISI 304.Chopper group removable, (Ø 98 mm) (easy maintenance), possibility to inverse rotation (if blocked). Grid of 6mm and knife in stainless steel "self sharpening".Drive gears in oil bath, made for intensive use.Control (24 V), thermic protection.
%
The outer frame is made of "aluminum alloy".The body of the chopper as well as the internal auger are also made of "aluminium alloy" treated for food and stainless steel, all the internal parts are easily dismantled for an easy maintenance.Upper bowl in stainless steel AISI 304.Supplied as standard with 6 mm grid.Self-sharpening stainless steel grid and knife.Gear drive in oil bath.Low voltage control 24 V.Supplied with a stainless steel AISI 304 container to collect the minced meat.The...
%
Ventilated motor with thermal protection. Exterior chassis in "aluminum alloy".The body of the chopper and the inside out leadscrew are also manufactured in treated "aluminum alloy" for food and stainless steel, all the interior parts are easily dismantled allowing easy maintenance.Upper bowl in stainless steel AISI 304.Standard delivered with a 6 mm grid.Grid and blade in stainless steel "auto-sharping".Ventilated motor, ideally designed for intensive use.Wheel drive in oil bath.Low voltage...
%
Exterior chassis in "aluminum alloy".The body of the chopper and the inside out leadscrew are also manufactured in treated "aluminum alloy" for food and stainless steel, all the interior parts are easily dismantled allowing easy maintenance.Upper bowl in stainless steel AISI 304.Standard delivered with a 6 mm grid.Grid and blade in stainless steel "auto-sharping".Wheel drive in oil bath.Low voltage control 24V.Aplliances are in compliance with standards (CE) in force.
%
%
- 4 independent plates, Ø 180 mm (4x 2 kW). - Electric convection oven GN 2/3 (3 kW), 370x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 4 independent plates, Ø 180 mm (4x 2 kW). - Electric convection oven GN 2/3 (3 kW), 370x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 4 separate hobs (4x 2,6 kW).- Electric convection oven 5xGN 1/1 (3,96 kW), dimensions 530x340xh325 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.- Oven room and double glazed door provided with thermic spun glass isolation. Hinged oven door with spring system, grip in stainless steel.- Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.- Electric convection oven GN 1/1,...
%
4 separate hobs (4x 2,6 kW).Electric convection oven 5xGN 1/1 (3,96 kW), dimensions 530x340xh325 mm. Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.Oven room and double glazed door provided with thermic spun glass isolation. Hinged oven door with spring system, grip in stainless steel.Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.Electric convection oven GN 1/1, heating...
%
- 4 burners (2x 3.3 kW and 2x 3.6 kW). - Electric convection oven GN 2/3 (3 kW), 370x340xh325 mm).- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Burners with "high efficiency" brass crowns, regulation by gas valve. Upper grids in enamelled cast iron. - Electric convection oven (GN), in stainless steel,...
%
- 5 burners (2x 3.3 kW and 3x 3.6 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm).- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Burners with "high efficiency" brass crowns, regulation by gas valve. Upper grids in enamelled cast iron. - Electric convection oven (GN), in stainless steel,...
%
- 4 burners, (2x 3,6 kW and 2x 5 kW). - Electric convection-oven GN 1/1 (3,96 kW), dimensions 530x340xh325 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs in stainless steel.- Oven room and double glazed door provided with thermic spun glass isolation. Hinged oven door with spring system, grip in stainless steel.- Burners of treated cast iron, crown of brass (with very high output). Enamelled fat catchingplate for cookfluid, regulation through gas-tap. Upper enamelled...
%
- 6 burners, (3x 3,6 kW and 3x 5 kW).- Electric convection-oven GN 1/1 (3,96 kW), dimensions530x340xh325 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs in stainless steel.- Oven room and double glazed door provided with thermic spun glass isolation. Hinged oven door with spring system, grip in stainless steel.- Burners of treated cast iron, crown of brass (with very high output). Enamelled fat catchingplate for cookfluid, regulation through gas-tap. Upper enamelled grid,...