%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 6x GN1/1 or 5x 600x400mm.Production per cycle: 30Kg (+70° +3°) and 30Kg (+70° -18°).Chamber size: 505x705xh450mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 10x GN1/1 or 8x 600x400mm.Production per cycle: 50Kg (+70° +3°) and 50Kg (+70° -18°).Chamber size: 505x705xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
Cell for loading GN 2/1 (or GN 1/1).Load capacity: 10x GN2/1 or 8x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 70Kg (+70° -18°).Chamber size: 670x843xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness. Deep-drawn bottom that...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 20x GN1/1 or 16x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 85Kg (+70° -18°).Chamber size: 525x705xh1453mm.Core probe.Compressor unit not included.Trolley & charger 600x400 EURONORM (on request ref: AC/2P2...)NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick,...
%
Cell for loading plates GN 2/1 (or GN 1/1).Load capacity: 20x GN2/1 or 16x 600x400mm.Production per cycle: 200Kg (+70° +3°) and 170Kg (+70° -18°).Chamber size: 780x946xh1850mm.Cell delivered disassembled.Core probe.Compressor unit not included.Trolley & charger 600x400 EURONORM (on request ref: AC/2P2...)NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel), stainless steel feet. Cooking chamber: fully welded,...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel), stainless steel feet. Cooking chamber: fully welded,...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref: AC/SE...)NB: delivered without grids and without GN plates. Interior and external construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref: AC/SE...)NB: delivered without grids and without GN plates. Interior and external construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel),...