%
- Motorized closing of the porthole.- "Sloping" upper control panel. - Anti-balance control (no necessity for ground anchor). - With "touch screen" (7") embedded computer, multilingual, 200 memory programs (8 programmed from factory). - Super spin-drying 1000 turns/min. (factor-G 300). - Stainless steel tank and basket AISI 304. - Residual humidity 50 %. - Connection cold or hot water. - Upper basin with 3 compartments for washing products_backup_1_1. - Emergency stop button, "Hot shot"...
%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
Cooling capacity 1577 (W/f) for chamber volume 16,3 m³ / 16300 Lit (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Supplied with a cable for the connection of the door heater. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
An intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED...
%
Lighting for the exhibition is LED type (under the upper glass). Thermoformed ABS cheeks, front, and back in plastic-coated sheet metal.Tempered glass windows, front glass straight at 90°, hinged and foldable with a safety stop point (easy maintenance).Anodized aluminum profiles.Exhibition made of AISI 304 stainless steel, depth 700 mm (EURONORM and GASTRONORM).Plexiglas deflector, ensuring even temperature distribution.Worktable in AISI 304 stainless steel.LED lighting for the...
%
Two intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM ).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Internal and external construction in AISI 304 stainless steel, thermal insulation in ceramic fibre, control panel equipped with a stainless steel filter, preventing clogging of components (ventilated panel), stainless steel...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Internal and external construction in AISI 304 stainless steel, thermal insulation in ceramic fibre, control panel equipped with a stainless steel filter, preventing clogging of components (ventilated panel), stainless steel...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Internal and external construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet....
%
Production capacity 200 kg (290 Lt)Flour capacity 133 kg2 speeds, automatically adjustable (Spiral: 1st Speed 111 rpm and 2nd Speed 223 rpm) & (Tank: 15 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 900xh470 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Internal and external construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet....
%
Production capacity 250 kg (390Lt)Flour capacity 166 kg2 speeds, automatically adjustable (Spiral: 1st Speed 114 rpm and 2nd Speed 228 rpm) & (Tank: 15 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 1000xh470 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 8 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R134A, drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Adjustable feet.NB Provide discharge (or) a condensate drain pan.
%
2 independent Ø 300 mm cooking zones (2x 3.4 kW). Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th) leveling cylinders, waterproof "IPX5".Glass ceramic (6 mm), with 300 mm diameter radiant heaters, fast temperature setting, graduated energy regulator for each heater.Appliances built in compliance with current standards (CE)